Achieving Safety With A Burglar Alarm

Years ago, home burglar alarms were only found with rich homes. These days however, the prices have dropped and they are becoming more common with homes of average folk.

With home burglar alarms, there are two types – open and closed circuit. Open circuit systems work by setting off an alarm when the circuit closes. You can check more about this through online circuit simulator.

Another, more sophisticated option, are motion sensors. Motion sensors sense any type of motion within a certain radius to the sensor. It sends a signal out to the control panel that will analyze it and see if the movement is considered suspicious once it has sensed any motion. If the movement is indeed considered suspicious, it will react to the way you have it set up and inform the proper authorities or sound the alarm.

Motion sensors can also be adjusted. You can adjust them for things such as pets walking around or any other activity that is common with your home that wouldn’t signify a burglary taking place. Motion sensor alarms are very common these days, and one of the best ways to keep your home safe from a burglar – and give you peace of mind in knowing that you are protected.

Normally, it’s a good idea to use motion sensors and magnetic switches with your burglar alarm setup. Magnetic switches will protect doors and windows while the motion sensors will help to protect larger rooms, such as living rooms and hallways. The combination of the two is never a bad idea – and will go a long way in protecting your home.

Another available option that you have is a security camera. Video cameras are also common these days, and can be mounted in very strategic areas throughout the parameter of your home. They will pick up images in the area they are mounted, which will be displayed on the monitor. You can also record the video to a videotape as well, making it an ideal choice for anyone who wants to keep track of the information that the camera picks up.

You can also get a burglar system from a home security company. Once the alarm is set off, the company will immediately inform the local police or send their own security personnel out to your home.

Investing in a burglary system of any type is always a smart investment. You have several different to choose from, depending on your needs. If you’ve been worried about your home and the things you keep inside your home, you should invest in a burglary system. They will help you keep peace of mind, and know that you are protected. They don’t cost that much either, which makes them an even better investment. If you own a home – you shouldn’t hesitate to invest in a burglary system.

Years ago, home burglar alarms were only found with rich homes. With home burglar alarms, there are two types – open and closed circuit. Motion sensor alarms are very common these days, and one of the best ways to keep your home safe from a burglar – and give you peace of mind in knowing that you are protected.

Once the alarm is set off, the company will immediately inform the local police or send their own security personnel out to your home. If you’ve been worried about your home and the things you keep inside your home, you should invest in a burglary system.


Passing The CCNA And CCNP: Cisco Home Lab FAQ

There is a real revolution today among CCNA and CCNP candidates. More and more of you are turning your back on “router simulators” and putting your own CCNA and/or CCNP Home Lab together, which is the best way to totally prepare to pass these tough Cisco exams.

I get hundreds of emails every month from CCNA and CCNP candidate who are putting together their first lab or adding to their existing one. I’m always glad to help with suggestions, and I thought I ‘d list five common questions regarding home labs here.

Do I have to spend thousands of dollars?

No! There are vendors all over the web, as well as on ebay, who sell used Cisco routers and cisco switches 2016 to Cisco exam candidates like you every single day. They sell kits that consist of multiple routers and switches, as well as single routers and switches. You can add one piece at a time, or make a larger investment. You can spend just a few hundred dollars and put together a very nice lab.

What’s an “access server”?

It’s not what it sounds like. When I first heard the term, I thought of a typical server like we see in LANs every single day. An access server is actually a Cisco router that allows you to connect to multiple other routers and switches without continually moving the rolled cable around.

You don’t have to have an access server right away, but once you add a few more routers and switches to your lab, you’ll get tired of moving the rollover cable from console port to console port. (The console port is used to directly connect your PC to the router.) You’ll find an access server is easy to set up and configure, and will save you quite a bit of time.

What’s a “frame relay switch”?

Again, it’s not quite what it sounds like. A frame relay switch is not a switch; it’s a Cisco router that has been configured to serve as a frame relay provider in your home lab.

This is very close to being a “must” for your home lab. Again, the configuration is easy, and having a frame relay switch in your home lab will give you practice that will be invaluable on exam day.

Do I need a switch? What switch should I buy?

If your budget allows, I recommend you get at least one switch in your lab; two. Make sure that at least one of your switches has an IOS; 1900 switches do not have an IOS and while they’re better than not having a switch, they’re not going to give you the practice you need to pass the CCNA and CCNP. Look to the 2500 family of switches.

I want to build my CCNP lab and then use it for the CCIE. What should I buy?

It’s impossible to tell what technologies and devices will be on the CCIE lab, even if you zip through the CCNP and then take the IE within six months. Cisco refreshing the CCIE lab blueprint every six months, and different technologies can be taken off the lab. While Cisco gives plenty of notice that these changes are going to take effect, it can be a big pain in your wallet if Cisco takes something off of the exam after you spend a bundle to add it to your lab.

As an example, Cisco is in the process of removing ISDN and ATM from the CCIE Routing & Switching lab. If you bought an ATM switch for your lab, you’ve got an expensive paperweight right now. While you may be able to practice your core protocols on a CCIE home lab, it’s going to be difficult and expensive to keep your home lab totally current with the Cisco lab blueprint.

The decision to put together your own CCNA or CCNP home lab is the best decision you can ever make – and I speak from experience. With home labs becoming less expensive every day, it’s becoming more affordable as well. Start looking into used Cisco router vendors today (ebay is a great place to find some vendors, as is Google), and you can be practicing on REAL Cisco routers and switches soon – and be totally prepared for CCNA and CCNP exam success.

You don’t have to have an access server right away, but once you add a few more routers and switches to your lab, you’ll get tired of moving the rollover cable from console port to console port. Again, the configuration is easy, and having a frame relay switch in your home lab will give you practice that will be invaluable on exam day.

I recommend you get at least one switch in your lab; two if your budget allows. Cisco refreshing the CCIE lab blueprint every six months, and different technologies can be taken off the lab. While you may be able to practice your core protocols on a CCIE home lab, it’s going to be difficult and expensive to keep your home lab totally current with the Cisco lab blueprint.